Every display has three settings that decide how it behaves: Launch mode, Location source and Cue source. Most displays play a playlist or a schedule in one place. For those, keep all three at their defaults.
You'll find them on the display record. Go to Manage Account → Displays in STQRY Builder and open the display.
Recommended settings
| Your display | Launch mode | Location source | Cue source |
|---|---|---|---|
| A lobby, gallery or promo display playing a playlist or schedule | Player | None | None |
| A display on a vehicle, on a device with its own GPS | Player | On device | None |
| A passenger display on a vehicle, with no GPS of its own | Player | Poll a server | None |
| A passenger display that plays cues a guide or driver fires | Player | As above | Poll a controller |
| The guide's or driver's own device | Controller | As needed | This device's controller mode if it also plays content, otherwise None |
If you're not sure, use Player, None and None. Those are the defaults, and they're right for any display that stays in one place.
Launch mode
Launch mode sets what the device does when it starts.
- Player: plays the content you assign. This is almost every display.
- Controller: shows buttons a guide or driver taps to fire manual cues.
A controller needs a Signage - Standard license. See Location programs: manual cues and controller mode.
Location source
Location source tells the display where it is, so a location program can play content for that place.
- None: no position. Use this for any display that doesn't move.
- On device: uses the device's own GPS.
- Poll a server: fetches the position from another device on the same network.
Location only matters for a display showing a location program. A playlist or a schedule ignores it. See Set a display's location source.
Cue source
Cue source lets a guide or driver play content on this display by hand, from a controller.
- None: the display takes no manual cues. Use this unless you have a controller.
- Poll a controller: the display plays cues fired on the controller at the Controller URL you enter.
- This device's controller mode: the controller on this same device fires the cues.
See Location programs: manual cues and controller mode.
Signage - Basic displays
A display on a Signage - Basic license is always a Player with location source None. Builder won't save a controller or a location source on it. See License types and what each includes.
Settings on the device win
A launch argument or a change in the on-device settings overlay overrides what you set in Builder. If a display ignores a change, check its settings overlay. See Open the on-device settings overlay.
Next steps
- Connect a display to your account: adopt the device before you set it up.
- Assign content to a display: choose what the display plays.
- Supported platforms, devices and requirements: where to install the STQRY Signage app.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article