Adding Polylines to maps

You can add Polylines in your tour maps to help users find the correct or most direct route between stops.

 

To add a Polyline:

1. Go to your My Tours tab.

2. Click the tour you would like to edit.

3. Click on the Plot Stop on a Map header.

4. Select the Polylines icon Screen_Shot_2018-03-01_at_11.29.17_AM.png from the left-hand side of the screen

5. Then click on the map where you would like to start drawing a line.

6. Move your mouse in any direction to start drawing the line.

7. Then click again to place a line point. You can then change the line direction of the line and continue drawing.

8. Once you are done drawing the line click on the last point to finish the line. The line will change from dashed to solid.

You can add as many lines as you want.

Here is a GIF demonstrating how to add a Polyline:

Add_Polylines.gif

 

To edit an existing Polyline:

1. Click on the edit symbol Screen_Shot_2018-03-01_at_11.35.07_AM.png in the left-hand menu. The line will change from solid to dashed.

2. Click and drag any point on the line to move it.

3. Click Cancel on the left-hand menu to discard any changes.

4. Or click Save to commit the changes.

Here is a GIF demonstrating how to edit a Polyline:

Edit_Polylines.gif

 

To remove an existing Polyline:

1. Click the trash bin Screen_Shot_2018-03-01_at_11.35.18_AM.png symbol in the left-hand menu.

2. Click on a line to remove it.

3. Click Cancel on the left-hand menu to discard any changes.

4. Or click Save to commit the changes.

Here is a GIF demonstrating how to remove a Polyline:

Remove_Polylines.gif

Was this article helpful?
1 out of 1 found this helpful